GB-AM20
Cutting and removing of outer sheaths made of VPE or PVC material.
Medium or low voltage ranged cables can be stripped off very precised.
Diameters between Ø 26 - 62 mm can be processed. For the radial cut,
with a maximum cutting depth of about 3/3,5 mm, pull the tool up and down at an angle of about 60 °.
For the longitudinal cut, with a maximum cutting depth of about 2,5/3,0 mm,
the device must be pulled with pressure along the cable.
Insert the upper claw into the generated slot and remove the sheath in one piece by pulling it off.
Attention - Do not use the tool until power is switched off !!
Medium or low voltage ranged cables can be stripped off very precised.
Diameters between Ø 26 - 62 mm can be processed. For the radial cut,
with a maximum cutting depth of about 3/3,5 mm, pull the tool up and down at an angle of about 60 °.
For the longitudinal cut, with a maximum cutting depth of about 2,5/3,0 mm,
the device must be pulled with pressure along the cable.
Insert the upper claw into the generated slot and remove the sheath in one piece by pulling it off.
Attention - Do not use the tool until power is switched off !!
Show 1 to 1 (from a total of 1 products)